Home > Effervescent Tablet Packaging >

Plastic PP Tubes With Or Without Desiccant Spiral Lids For Packaging Of Supplements

Product Categories

JND Packaging

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Plastic PP Tubes With Or Without Desiccant Spiral Lids For Packaging Of Supplements

Ask Lasest Price
Brand Name :	JND
Model Number :	VCB24T104
Price :	$0.067/pieces 10000-19999 pieces
Certification :	FSSC 22000; ISO 9001;
Supply Ability :	50000pcs for tube per day; 30000pcs for lid per day
Delivery Time :	3-5days

Add to Cart

Product Details
Company Profile

Plastic PP Tubes With Or Without Desiccant Spiral Lids For Packaging Of Supplements

Product Specification:

As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012

Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II

Type	No.	Item	Specifications		Inspection method	AQL Type
Molding	1	Appearance	Smooth surface, no obvious impurities, color particles and black spots Under normal distance 30cm, normal light, no black spots, impurities Uniform color, no mottled		Visual	Light
	2	Peculiar smell	No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample		Smell	Main
	3	￠24*104	Diameter	24.0±1.0mm	caliper	Main
			Height	104.0±1.0mm	Height gauge	Main
			Wall Thickness	1.0±0.4mm	Caliper	Main
			Height	33.0±1.0mm	Height gauge	Main
	4	￠24 Spiral Cap	Diameter	22.0±0.8mm	caliper	Main
			Height	27.0±1.0mm	Height gauge	Main
Function	1	Sealing Property	Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours.		Visual	Main
	2	Drop Property	Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture.		Visual	Main
	3	Thermo stability	Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured		Visual	Main
Print	1	Drawing	Color, Picture and Words same as standard sample		According to standard sample	Key
	2	Appearance	The appearance of the printed product is clean no soiling and deformity refer to standard sample		Visual	Light
	3	Peel strength	Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off.		Tape test	Main

Product Tags:

Desiccant Spiral Lids Plastic PP Tubes

Packaging of supplements Plastic PP Tubes

Plastic PP Tubes With Or Without Desiccant Spiral Lids For Packaging Of Supplements

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	JND Packaging
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Effervescent Tablet Packaging products from this supplier

Find Similar Products By Category:

Packaging & Paper

Hot Searches: